European-style T-type rear plug (10 kV, 20 kV)
European-style T-type rear plug (10 kV, 20 kV)

MengziEuropean-style T-type rear plug (10 kV, 20 kV)

The 630A European-style rear connector can be connected to a European-style front connector or to another rear connector, thereby providing an extended cable connection circuit (branch). However, it cannot be directly connected to bushing bases or wall bushings. The connector’s tail end can be directly sealed with an insulating plug, or it can be further extended to connect another European-style rear connector or a rear surge arrester.

Category:

MengziCable accessories

Phone: 400-888-8888

Request for Quotation

Product Description

　　Product Overview

　　The 630A European-style rear connector can be connected to a European-style front connector or to another rear connector, thereby providing an extended cable connection circuit (branch). However, it cannot be directly connected to a bushing base or a wall bushing. The connector’s tail end can be sealed directly with an insulating plug, or it can be further extended to connect another European-style rear connector or a surge arrester.

　　12kV Cable Model Configuration Table

Model Specifications

Outer diameter of main insulation (mm)

Suitable for cable cross-section (mm²)

ZRQ3-12/630-25

16.5–17.8

25

ZRQ3-12/630-35-50

17.0–20.0

35-50

ZRQ3-12/630-70-95

20.0–23.1

70-95

ZRQ3-12/630-120-150

January 23–26

120-150

ZRQ3-12/630-185-240

August 25–30

185-240

ZRQ3-12/630-300

30.4–32.3

300

ZRQ3-12/630-400

33.0–35.4

400

　　24kV Cable Model Configuration Table

Stress Body Specifications

Outer diameter of main insulation (mm)

Cable model 12/20kV

Cable model 18/20 kV

￠16

￠19.6-20.9

35-50

 

￠19

￠22.4-25.5

70-120

35

￠23

￠26.3-29.5

150-185

50-95

￠26

￠30.9-34

240-300

120-185

￠31

￠36.1–39.5

400-500

240-300

￠35

￠41.5-45

630

400-500

1

　　Performance

　　● When mated with the appropriate bushing or plug, it provides a fully shielded and fully sealed separable connection; it can operate reliably underwater and in other harsh environments for extended periods.

　　● Built-in capacitor test points are used to determine the energized status of the circuit or to install a live indicator; no minimum phase-to-phase clearance requirement applies.

　　● Installation can be vertical, horizontal, or at any angle.

 

Previous item

MengziEuropean-style front connector (10 kV, 20 kV)

Mengzi17/45 kV European-style surge arrester (10 kV)

Next item